Skip to content
Sensitify

Blog

Application notes, measurement tutorials, and product news.

ECA-LP1 design overview: USB PPS, aluminium chassis, lower noise floor

Product, Jan 2026

ECA-LP1 design overview: USB PPS, aluminium chassis, lower noise floor

Three changes in the ECA-LP1 compared with the earlier ECA series: a USB PPS power stage, an aluminium chassis, and a redesigned analog front-end with a lower noise floor.

Read
Our downloads page has been updated

News, Dec 2025

Our downloads page has been updated

You can now get the latest Sensitify Studio releases and firmware updates directly from our website, with full native support for both macOS and Windows platforms.

Amperometric measurement of blood glucose test strips

Application note, Jul 2025

Amperometric measurement of blood glucose test strips

Most electrochemical sensors work by measuring Faradaic reactions on the electrode-solution interface. We reproduce a commercial glucometer with the ECA-5M and disposable enzymatic strips.

Parameter selection for electrochemical impedance spectroscopy

Tutorial, Jul 2025

Parameter selection for electrochemical impedance spectroscopy

Amplitude, DC bias, frequency range, quiet time, and post-processing for EIS.

Sensitify Go is out

Product, Jun 2025

Sensitify Go is out

Sensitify GO lets you run EIS and voltammetry from an Android phone. Connects to the MCA Mini and ECA series over USB.

Detecting low concentrations of biomarkers

Application note, May 2025

Detecting low concentrations of biomarkers

With high-frequency impedance spectroscopy, capacitance changes as small as 0.2 pF are resolved without a redox probe.

Application of CV using Sensitify Go

Application note, May 2025

Application of CV using Sensitify Go

Using our Android app, you can perform electrochemical techniques without a PC. Demonstrated with our reusable PCB-based gold-plated electrodes.

High accuracy current measurements

Application note, May 2025

High accuracy current measurements

ECA-series potentiostats use four high-resolution analog-to-digital converters in interleaved mode. 10 pA steps are resolved over a 19.6 nA background.

Using ECA-series potentiostats as lock-in amplifiers

Application note, May 2025

Using ECA-series potentiostats as lock-in amplifiers

Detection of a 500 kHz signal in 0.01 mV RMS steps with the built-in lock-in amplifier.

ECA series and our point-of-care test at the Ankara University project fair

News, Mar 2025

ECA series and our point-of-care test at the Ankara University project fair

We showed the ECA series and our point-of-care test for cancer screening at the Ankara University Interdisciplinary Project Fair.